MCE 18/-/5 Control Components
MCE 18/-/5 is the UK National Committee responsible for Control Components standards within the Fluid Power Category. Members of this committee also provide the UK view to the following international committees ISO/TC 131/SC 5 (Including Working Groups 1, 2, 3 & 4).
| Richard Driver | SMC UK | Committee Chairman |
| Nicky Quinn | BFPA | Committee Secretary |
| Philippa Younas | BSI | BSI Liaison |
| Representative | Husco International | Committee Member |
| Representative | Danfoss | Committee Member |
| Representative | Holmbury Limited | Committee Member |
| Representative | SMC UK | Committee Member |
Committee description, responsibilities, terms of reference and scope
| Committee | Category 1 | Category 2 | Number | Title |
|---|---|---|---|---|
| MCE 18/-/5 | Pneumatic | BS 6005:1997 | Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators |
|
| MCE 18/-/5 | Electrical | BS 6361:1988 | Specification for three-pin plug connectors for electrically controlled fluid power equipment | |
| MCE 18/-/5 | General | BS 6683:1985 | Guide to installation and use of valves | |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 4401:2005 | HFP – Four-port directional control valves – Mounting surfaces |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 5599-1:2001+Cor 1:2007 | PFP – Five-port directional control valves Part 1: Mounting interface surfaces without electrical connector |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 5599-2:2001+A1:2004+Cor 1:2007 | PFP – Five-port directional control valves Part 2: Mounting interface surfaces with optional electrical connector |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 5781:2016 | HFP – Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves – Mounting surfaces |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 5782-1:2017 | PFP – Compressed air filters Part 1: Main characteristics to be included in supplier’s literature and product marking requirements |
| MCE 18/-/5 | Pneumatic | Pneumatic Test Methods | BS ISO 5782-2:1997 | PFP – Compressed air filters Part 2: Test methods to determine the main characteristics to be included in supplier’s literature |
| MCE 18/-/5 | Hydraulic | Hydraulic Valves | BS ISO 5783:2019 | HFP - Code for identification of valve mounting surfaces and cartridge valve cavities |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 6263:2013 | HFP – Compensated flow-control valves – Mounting surfaces |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 6264:1998 | HFP – Pressure relief valves – Mounting surfaces |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 6301-1:2017 | PFP – Compressed air lubricators Part 1: Main characteristics to be included in supplier’s literature and product marking requirements |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 6301-2:2018 | PFP – Compressed air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 6358-1:2013+A1:2020 | PFP – Determination of flow-rate characteristics of components using compressible fluids Part 1: General rules and test methods for steady-state flow |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 6358-2:2019 | PFP – Determination of flow-rate characteristics of components using compressible fluids Part 2: Alternative test methods |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 6358-3:2014 | PFP – Determination of flow-rate characteristics of components using compressible fluids Part 3: Method for calculating steady-state flow-rate characteristics of systems |
| MCE 18/-/5 | Pneumatic | BS ISO 6953-1:2015 | PFP – Compressed air pressure regulators and filter regulators Part 1: Main characteristics to be included in literature from suppliers and product marking requirements |
|
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 6953-2:2015 | PFP – Compressed air pressure regulators and filter regulators Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 6953-3:2013 | PFP – Compressed air pressure regulators and filter regulators Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
| MCE 18/-/5 | Hydraulic | Hydraulic Valves | BS ISO 7368:2016 | HFP – Two-port slip in cartridge valves - Cavities |
| MCE 18/-/5 | Hydraulic | Hydraulic Valves | BS ISO 7789:2007 | HFP – Two, three and four-port screw-in cartridge valves - Cavities |
| MCE 18/-/5 | Hydraulic | Hydraulic Valves | BS ISO 7790:2013 | HFP – Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 0,5 – Clamping dimensions |
| MCE 18/-/5 | Pneumatic | BS ISO 8778:2003 | PFP – Standard reference atmosphere | |
| MCE 18/-/5 | Pneumatic | BS ISO 10041-1:2010 | PFP - Electro-pneumatic continuous flow rate control valves Part 1: Main characteristics to include in the supplier's literature | |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 10041-2:2010 | PFP - Electro-pneumatic continuous flow rate control valves - Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| MCE 18/-/5 | Pneumatic | BS ISO 10094-1:2021 | Pneumatic fluid power. Electro-pneumatic pressure control valves - Main characteristics to include in the supplier's literature | |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 10094-2:2021 | Pneumatic fluid power. Electro-pneumatic pressure control valves - Test methods to determine main characteristics to include in the supplier's literature |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 10372:1992 | HFP – Four and five-port servo valves – Mounting surfaces |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 11727:1999 | PFP – Identification of ports and control mechanisms of control valves and other components |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 12238:2023 | Pneumatic fluid power. Directional control valves. Measurement of shifting time |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 12500-1:2007 | Filters for compressed air – Test methods Part 1: Oil aerosols |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 12500-2:2007 | Filters for compressed air – Test methods Part 2: Oil vapours |
| MCE 18/-/5 | Electrical | BS ISO 15217:2000 | Fluid power systems and components – 16mm square electrical connector with earth contact – Characteristics and requirements | |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 15218:2003 | PFP – 3/2 solenoid valves – Mounting interface surfaces |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 15407-1:2000 | PFP – Five-port directional control valves, sizes 18 and 26mm Part 1: Mounting interface surfaces without electrical connector |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 15407-2:2003 | PFP – Five-port directional control valves, sizes 18 and 26mm Part 2: Mounting interface surfaces with optional electrical connector |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | BS ISO 16873:2011 | HFP – Pressure switches – Mounting surfaces |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 17082:2004 | PFP - Valves - Data to be included in supplier literature |
| MCE 18/-/5 | Hydraulic | Hydraulic Valves | PD ISO/TR 17209:2013 | HFP – Two, three and four port screw in cartridge valves – Cavities with ISO 725 (UN and UNF) threads |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 20145:2019 | PFP – Test method for measuring acoustic emission pressure level of exhaust silencers |
| MCE 18/-/5 | Pneumatic | Pneumatic Valves | BS ISO 20401:2017 | PFP – Directional control valves – Specification of pin assignments for electrical round connectors of diameters 8 and 12mm |
| MCE 18/-/5 | Electrical | ISO 4400:1994 | Fluid Power Systems and Components - Three-pin electrical plug connectors with earth contact - Characteristics and requirements | |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Test Methods | ISO 6403:1988 | HFP - Valves controlling flow and pressure - Test methods |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Test Methods | BS ISO 10770-1:2009 | Hydraulic fluid power. Electrically modulated hydraulic control valves - Test methods for four-port directional flow-control valves |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Test Methods | BS ISO 10770-2:2012 | Hydraulic fluid power. Electrically modulated hydraulic control valves - Test methods for three-port directional flow-control valves |
| MCE 18/-/5 | Electrical | ISO 6952:1994 | Fluid Power Systems - Two-pin electrical plug connectors with earth contact - Characteristics and requirements | |
| MCE 18/-/5 | Hydraulic | Hydraulic Valve Mounting | ISO 9461:1992 | HFP - Identification of valve ports, sub-plates, control devices and solenoids |
